Recycled tire mirror

Creating a recycled tire mirror is a fantastic way to repurpose old materials and add a unique touch to your home decor. Here’s a step-by-step guide to help you get started:

Materials Needed:

• An old tire
• A circular mirror (size depends on the tire)
• Plywood or a wooden board
• Strong adhesive (suitable for rubber and wood)
• Spray paint (optional, for painting the tire)
• Screws and a screwdriver
• A jigsaw or a strong utility knife
• Sandpaper

Instructions:

1. Clean the Tire: Thoroughly clean the tire to remove any dirt, grease, or debris. Use a hard bristle brush and soapy water.
2. Cut the Tire: Carefully cut the tire in half horizontally. This can be done using a strong utility knife or a jigsaw. Be cautious and take your time to ensure a clean cut.
3. Prepare the Wooden Backing: Measure the diameter of the tire and cut a circular piece of plywood or wooden board to fit snugly inside the tire. Sand the edges to smooth them out.
4. Attach the Mirror: Place the circular mirror on the wooden backing and mark its position. Apply a strong adhesive to the back of the mirror and press it firmly onto the wooden backing. Allow it to dry completely.
5. Mount the Wooden Backing to the Tire: Fit the wooden backing with the attached mirror into the tire. Secure it in place using screws around the perimeter of the tire.
6. Paint the Tire (Optional): If you want to give the tire a fresh look, you can spray paint it in your desired color. Make sure to do this in a well-ventilated area and allow the paint to dry completely.
7. Hang the Mirror: Attach a hanging mechanism to the back of the wooden board. You can use D-rings, picture wire, or any other sturdy hanging hardware.
8. Display Your Mirror: Find the perfect spot to hang your new recycled tire mirror and enjoy your unique creation!

This project helps with recycling and adds a rustic and creative element to your home decor.